YLL-IH 2.0 Induction Heater

£99.00

The YllVape YLL IH 2.0 Induction Heater is a super convenient and portable solution for heating your DynaVap without a torch. This new version makes use of variable wattage only, dual 18650 batteries and has improved reliability. The YLL IH 2.0 is compatible with all DynaVaps, this includes ones with a VSC or FMJ attached and can also be used with the Anvil. This Induction heater is sadly not compatible with the Dani Vape (BFG) range of products.

 

1 in stock

SKU: YLL20 Categories: , Tags: , , ,

Description

Variable power/wattage

Select the wattage then simply pop your DynaVap in the YLL IH 2.0 and wait for the click! Higher wattages make for faster heating, a faster click and perform more like using a torch. Lower wattages heat the cap more slowly for a different vapour profile, allowing heat to sink in more slowly. Like most portable induction heaters it works best if you hold it there for a few seconds after the click. The on screen timer makes doing this reliably and repeatedly very easy.

The IH can be turned up as high as 60W for fast heating, with fully charged batteries a “boost mode” can be enabled by holding down  + and – buttons together for a couple of seconds, this will allow for up to 70W. Unlike the original YLL IH as the battery drains the max wattage on the screen will automatically decrease, allowing you to know how much power is being put out and adjust your timer accordingly for the best experience.

To change the cut out timer hold the central button for 2 seconds then adjust using the + and – buttons. This can be adjusted between 10-60 seconds. 3 clicks will lock or unlock the device. There is also a 5 minute sleep timer in case you forget to turn it off!

The YLL IH 2.0 also has a height adjuster, pop the battery cover off and inside you will find an adjustment device, insert this into the bottom coin style slot and twist in or out. This allows you to set how deep your DynaVap or Anvil sits inside the induction heater.

Charging speed has been upgraded to 2 Amps however it doesn’t have pass through charging, so if you’re planning on running it 24/7 we advise purchasing with four batteries and using an external 18650 battery charger to charge the depleted ones.  We advise sticking to high discharge batteries like the Molicel P28A or you’ll find the max wattage drops faster and lower than it otherwise would.

 

Included

  • YLL-IH Induction heater in Brushed Black.
  • Dual 18650 batteries (not included)
  • USB-C Cable
  • Instruction Manual
  • Optional Molicel P28A batteries

 

Specifications

  • 30-60W Wattage range (70W on boost mode)
  • USB-C – 5V/2Amp charging
  • Integral high strength (rare earth) magnet
  • Adjustable internal height
  • CE, ROHS and GMP certified
  • Dimensions approx. 635mm wide x 155mm long x 33mm tall
  • Weight 278 grams approx. (with batteries installed)
  • Please use 25A discharge batteries such as the Molicel P28A

 

Protections/Safety notes

  • Time-out protection after 16 seconds of heating
  • Over-charge protection
  • Over-current protection
  • Low voltage protection (low battery power)
  • Working temperature protection (-22 to 55C)
  • Charging temperature protection (automatically charges below 42C)
  • Storage humidity between 30-80% RH
  • Working temperature between -22C – 55C
  • 1 year warranty against defects

 

We can only ship this device within the UK with batteries as it does not contain integral batteries. 

If you are outside the UK please purchase without batteries and find suitable high discharge ones locally. 

You may also like…